CTNode 9.4 (HWClient)
- report immediate error on record multi channel
- Verify start of dialogic during start up
- improved error handling on dialogic dx_dial errors during answer machine detection
- Multiple ip cables could indicate lost network on wrong ip board
- Amtelco events on Win 7 had issues
- Recover from lost network to Central CTArchitect could fail in certain conditions
- Recover from lost network on aculab VOIP card
- no re initialise on Voip vmp
Requires: "MFC 9.0 redistributable"
- Wrong configured aculab settings does not block hwclient from starting
- AOC pulse possibility
- Mask CLI possibility
- -a command problem
- no disi event for on hook when an off hook phone goes on hook when the HWClient is not running.
- Waiting time start before dialogic service running detection
- Startup verification of dialogic and aculab drivers
- -a command parameters can be used to config amtelco drivers instead of using amtelcoconfig
- Transfer problem on innovaphone
- Reboot after 10 min no connection to Central CTArchitect by means of CTWatch
- New Layout
- Note when using VOIP an upgrade to Central CTArchitect 9.3.2.2 is required
- Relay digit on Amtelco could result in 1 way voice communication
- Note when using VOIP an upgrade to Central CTArchitect 9.3.1.8 is required
- ToS is now set at 0xA0 for QoS support
- VOIP Relay digit support for hwclients problem
- VOIP Relay digit support for hwclients without Aculab Prosody X
- Requires MFC 8.0 Redistributable
- Ring with 4 Amtelco client support
- Better VoIP Automatic Gain Control
- Keep Alive TCP/IP Socket feature implementation
- Version number is included in the debug files.
- File opening from a not existing server does not block other commands any more
- Better VoIP echo cancellation
- Answering machine detection improvement
- Disi ofhook detection at startup
- time shift detection
- improved voip echo canceling
- communication update
- Aculab ip network cable check
- VOIP play digits on digits
- VOIP
- H100 en amtelco prob
- play sound
predictive answer machine detection
- Registry is read from "HW Client" in stead of "HW Client Manager" !!!!!!!!!!!!!!!!!!
- CTWatch supported
- IP Codec selection
- Recording voice channel on different pc then the 2 isdn / mssi channels
- Aculab IP card Support
- Transfer does not work anymore on certain MSI cards solved
- Collision improvement
- Recording over amtelco problem
- Amtelco XDS lite Support